Overclocking your CPU can lead to all sorts of problems, but one of the worst is thermal throttling. This is when your CPU becomes so overworked that it can’t keep up with the demands of the operating system or applications. To prevent this from happening, you need to install a CPU liquid cooler. Liquid coolers use a closed-loop system to transfer heat away from the CPU and out into the environment.
This way, your system can operate at its full potential without risking thermal throttling or other issues. If you’re looking to upgrade your cooling system for your computer, be sure to check out our guide on how to install a CPU liquid cooler. It will walk you through the entire process step by step.
What is a CPU liquid cooler?
CPU liquid cooler is a device that is used to cool down a computer’s central processing unit (CPU). CPU liquid cooler is made up of a radiator, fan, and reservoir. A radiator is used to hold the liquid, while the fan and reservoir work together to move the liquid around.
One of the primary benefits of using a CPU liquid cooling system is that it can reduce the temperature of the CPU by a significant amount. This can allow your computer to run faster and more efficiently. Another benefit of using a CPU liquid cooling system is that it can help protect your computer from overheating. Overheating can damage your computer and lead to other problems.
To install a CPU liquid cooler, you will first need to purchase the necessary parts. You will also need to decide which type of CPU liquid cooler you want to purchase. There are three types of CPU liquid coolers: passive, active, and hybrid. Passive CPUs Liquid Coolers use fans to move air around the CPU; Active CPUs Liquid Coolers use pumps/motors/voluteurs technology in order to circulate water; Hybrid CPUs Liquid Coolers use both technologies together.
Once you have purchased the necessary parts, you will need to assemble them into your desired configuration. Next, you will need to attach your motherboard support bracket to your case in order for the CPU liquid cooler tubing connection point on the CPU liquid cooler kit (or compatible) to be accessible from outside the case.. Finally, you will need to connect the CPU liquid cooler tubing to the point on the motherboard support bracket that you configured.
What are the types of CPU liquid Coolers?
There are a few types of CPU liquid coolers on the market. The most common type is the water-based cooler. These coolers use a water pump to circulate liquid through the fins of the CPU and then expel it out the back. They are usually very quiet and offer good cooling performance.
The second type of CPU cooler is the air-based cooler. These coolers use an air pump to circulate air through the fins of the CPU and then expel it out the back. They tend to be noisier than water-based coolers, but they offer better cooling performance because they can reach much higher temperatures than water-based coolers.
The third type of CPU cooler is called a hybrid cooler. This type combines features from both water and air-based coolers. They have a water reservoir that holds enough liquid to keep the CPU cooled, but they also have an air filter to improve noise levels and airflow.
How to install a CPU liquid cooler?
There are many different types of CPU liquid coolers on the market, with different features and prices. Depending on your budget and needs, you may want to choose a high-end or low-end cooler.
If you’re just starting out, it’s best to start with a low-end cooler. These coolers are usually less expensive and easier to install, so they’re a good option if you’re new to this whole PC-building thing.
To install a low-end CPU liquid cooler, follow these steps:
1. Unbox your cooler and remove the protective stickers.
2. Clean the surface of your computer where the cooler will be installed. This is especially important if you’re using an all-in-one (AIO) machine like the HP Omen 17 laptop or the Dell Inspirion 5580 desktop. Wet a cloth with cold water and use it to clean off any dust or dirt that may be present on the surface of your computer. Make sure no dust or other particles get into any of the cooling fins on the CPU cooler.
3. Place the CPU cooler on top of your computer so that the fan is facing down into the computer case. The screws that come with most coolers should fit into any holes in your computer case (check for compatibility before installing). When you have installed all four screws, hold down one side of the CPU cooler while putting in another screw until it’s tight (this will ensure that the cooler doesn’t move while you’re installing the remaining screws).
4. If your computer has a motherboard that has a back plate, place the CPU cooler on top of the back plate and align the screw holes on the cooler with those on the motherboard. Once aligned, put in the remaining screws. You may need to hold down one side of the CPU cooler as you do so.
5. Replace any protective stickers that came with your CPU cooler. Now your CPU liquid cooler is ready to use!
Conclusion
CPU liquid cooler installation is not a very difficult task. However, there are some things that you need to keep in mind while installing the CPU liquid cooler. Keep these tips in mind while installing your CPU liquid cooler and you should be able to install it without any trouble.