How to disable C States in BIOS?

How to disable C States in BIOS?

Ever since the introduction of PCs, microprocessors have been powering them. And as technology has evolved, so too has the way microprocessors are used. One such example is the use of C States. C States are short-term power-saving modes that can be activated by the BIOS. When enabled, they can save energy by disabling some of the more power-hungry components of the microprocessor.

In this blog post, we’re going to discuss how to disable C States in BIOS and why it might be useful for you. We’ll also provide a few tips on how to make sure your BIOS is configured correctly for this purpose.

What are C States?

c states in bios settings

C States are a power management feature in some computers that allow the computer to save battery life by suspending or halting the functioning of certain components when the computer is not being used. This can be helpful if you are using your computer primarily for work and don’t want it to constantly be turning on and off. However, C States can also cause problems if you’re trying to use your computer while it’s in C State, as it can prevent you from accessing certain functions or programs. If you experience any problems with your computer while it’s in C State, you can disable C States in BIOS to fix the issue.

How do they work?

Most modern processors feature C States, which are designed to save power by suspending the processor in certain states. However, some users may find that C States can cause problems with their system. This article provides instructions on how to disable C States in your BIOS. 

How to disable C States in BIOS?

If you are looking to disable C States in your BIOS, there are a few different ways that you can go about it. The three most common methods are through the UEFI firmware, the COHERENT BIOS mode setting, or the ACPI settings.

To disable C States through UEFI firmware, open up your UEFI firmware and navigate to “Advanced > CPU Configuration”. Under the “Performance Mode” heading, select the option that says “Disable C-States”. Once you have enabled this setting, your computer will no longer enter C States when it is operating under load.

To disable C States through the COHERENT BIOS mode setting, open up your BIOS and navigate to “Advanced > CPU Configuration”. Under the “Performance” heading, change the setting from “Auto” to either “Enabled” or “Disabled”. This will determine whether or not your computer will enter into C States when it is operating under load.

Finally, if you want to disable C States through ACPI settings, open up your Windows 10 PC Settings and navigate to System > Advanced Settings > Performance.

There you will find a section called “Power management” which contains two options: “Allow Hybrid Sleep” and “Enable C-States”. If you select the first option (“Allow Hybrid Sleep”), then your computer will not enter into any power-saving modes (C States included) when it is operating in hybrid sleep mode.

Conclusion

There are three different ways to disable C States in BIOS: through UEFI firmware, COHERENT BIOS mode setting, or the ACPI settings. Each method has its own set of pros and cons, so it is important to choose the method that is best suited for your needs.
By disabling C States in BIOS, you can potentially save energy and avoid any problems that may be caused by the feature. If you experience any problems with your computer while it is in C State, you can disable C States in BIOS to fix the issue.


Share post on
Yasir Jamal
By Yasir Jamal

Meet Yasir here! As a blogger for more than six years, my passion has never faded. I love writing in a variety of niches. I am a tech enthusiast plus outdoor geek and blogger who likes to write about technology and gadgets. I am known for honest product reviews and am always looking for the latest and greatest technology. I have been blogging for over five years, and my articles are featured on some of the top tech websites. When I am not writing, I spend time with my family or working on my next big project. Cheers!



Technifyer is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Addressing the iBUYPOWER AIO Cooler Noise Problem Knowledge Base

Addressing the iBUYPOWER AIO Cooler Noise Problem

iBUYPOWER AIO Cooler Noise: Understanding the IssueOne common issue that users of iBUYPOWER AIO...

By Hasher Jamal
Updated
Elden Ring Controller or Keyboard: What’s Better? Knowledge Base

Elden Ring Controller or Keyboard: What’s Better?

The release of Elden Ring was a monumental event in the gaming world, and...

By Yasir Jamal
Updated
How to Change CPU Cooler Knowledge Base

How to Change CPU Cooler

If you're feeling a bit overworked and your CPU is starting to get a...

By Yasir Jamal
Updated
How to Change Light Mode on Fantech Keyboard Knowledge Base

How to Change Light Mode on Fantech Keyboard

Wondering to know how to change light mode on Fantech keyboard? Can't figure out...

By Yasir Jamal
Updated
How to Remove Stuck CPU from Cooler? Knowledge Base

How to Remove Stuck CPU from Cooler?

Removing a stuck CPU from the cooler can be a daunting task, but it...

By Yasir Jamal
Updated
Are CPU Coolers Intake or Exhaust? Knowledge Base

Are CPU Coolers Intake or Exhaust?

Any seasoned PC builder will tell you that one of the most important parts...

By Yasir Jamal
Updated
How Does a CPU Liquid Cooler Work? Quick Answer Knowledge Base

How Does a CPU Liquid Cooler Work? Quick Answer

CPUs are one of the most essential parts of any computer system. Without them,...

By Yasir Jamal
Updated
How to Install CPU Liquid Cooler? Step by Step Knowledge Base

How to Install CPU Liquid Cooler? Step by Step

Overclocking your CPU can lead to all sorts of problems, but one of the...

By Yasir Jamal
Updated